Suzuki Two-stroke Message Board
| Suzuki Two-stroke Message Board ]

    Re: Crank sealssimple leak check

    Tell a friend about this message!

    Posted by Paul(Brisbane) on 3/7/2001, 7:06 am , in reply to "Re: Crank seals"
    203.147.162.148

    Hey Greg, If you've still got the motor pulled down, there are 2 holes in the centre bearing case. just block one of them & use a oil squirt can in the other. I soon found out that my seals were leaking!If the centre ones don't leak then you can replace the other2 without pulling the carnk apart. Hope this is a help. Cheers ,Paul


    Responses:


    Please ignore boxes below, they are not operational on this archive site

      Your Name:

      Your Email:

      Subject:

      Message:

      Optional Link URL:

      Optional Link Title:

      Optional Image URL:

RETURN TO BULLETIN BOARD ARCHIVES