Suzuki Two-stroke Message Board
Suzuki Two-stroke Message Board ]


    Posted by TODD T. on 5/16/2001, 4:16 pm , in reply to "Re: SOUNDS ALL TOO FAMILIAR TO ME..."

    Yes the process is the same as with points. Actually it's even easier. Use the L.E.D. for each cylinder on the Neutronic unit as an indicator for when the coil should fire. The light for left cylinder comes on when the left coil is energized and it goes out when the coil fires. Just set the optical sensor so that the L.E.D goes out at the correct distance before TDC. Do this with all three cylinders and you should be ready to go.


Post a Response boxes below - don't work

Create your own message board, FREE!
Copyright ©Boardhost | Usage Terms