Suzuki Two-stroke Message Board
Suzuki Two-stroke Message Board ]

    Re: timing a race engine

    Posted by Zooke on 5/23/2001, 10:35 pm , in reply to "timing a race engine"
    198.76.106.165

    What igniton are you running? What cc's are the heads and what is the squish clearance?

    With out that information I would go with 2.5mm BTDC. Stock is 3.4mm. I my motors I currently run 3.0mm and Factory bikes ran 3.1mm. But they could afford to constantly rebuild.

    I also run the jetting on the fat side.


    Responses:


Post a Response boxes below - don't work

Create your own message board, FREE!
Copyright ©Boardhost | Usage Terms