Suzuki Two-stroke Message Board
Suzuki Two-stroke Message Board ]

    Dellorto setup going better than expected.....

    Posted by Justin on 6/5/2001, 11:19 pm
    216.98.87.122

    I tore the old rubber off of the mounting flanges down to bare metal.I placed an order for the
    1 3/4" Cromoly tube to lengthen and taper the flange and went to the next door auto parts and found the 1 3/4" gas resistant line to mount them together.I'll have to cut new gaskets to go between the cylinders and the flanges.I was wandering why it never ran right the two times I tried to start it.It never had gaskets.It was sucking air between the flange and cylinder.Duh!!!!Anywho if nothing else flys all to pieces I should have everything on by the end of next week.I'll keep everyone posted.


    Responses:


Post a Response boxes below - don't work

Create your own message board, FREE!
Copyright ©Boardhost | Usage Terms