HONDA CR750
Joep Kortekaas' Honda 750 CR kitted race bike
Engine Analysis
Warning: (this is quite a graphic and table intensive page to load,; but worth the wait)
Motor Power Inlet System Exhaust System Friction and Drag
Restoration Process Photo Gallery Joep Koortekaas Page
Exhaust valve diameter |
28 |
mm |
Exhaust valve area |
616 |
mm2 |
||
Number of exhaust valves |
1 |
Total exhaust valve area |
616 |
mm2 |
|||
Velocity of sound |
800 |
m/s |
|||||
Diameter of exhaust pipe |
31 |
mm |
Optimum dia. of exhaust pipe 7) |
33 |
mm |
||
Order of pulsation q = 6 |
|||||||
Length of exhaust pipe |
528 |
mm |
|||||
Taper of megaphone 8) |
2.77 |
° |
Length of megaphone 10) |
852 |
mm |
||
L/k= 9) |
1.33 |
Major diameter of megaphone 10) |
72 |
mm |
|||
7) based on exhaust gas velocity of 70 m/s. |
|||||||
8) Should be between 2.5°and 4° |
|||||||
9) Should be between 1.3 and 2.8 according to Honda R&D |
|||||||
10) based on actual diameter of exhaust pipe |
|||||||

Motor Power Inlet System Exhaust System Friction and Drag
Return to Classic Motorcycling Homepage
Copyright: Murray Barnard/Joep Kortekaas - 1999